Keri Systems Doors NetXtreme - Manual (Page 6)

Doors NetXtreme TM Reference Manual Keri Systems, Inc.
Page 4 01945-100 Rev. 4.0
2.0 Getting Started
Figure 1: DoorsNXT Password
Figure 2: Windows Explorer - Client Application
2.1 Software Installation
An InstallShield wizard handles the software installation/upgrade process. Installing software is
basically a question and answer process.
1. Load the installation CD into the CD-ROM of the host computer. The AutoRun Menu appears.
2. Click on the Keri product that needs to be installed or updated. Follow the on-screen step-by-step
instructions.
3. Be sure to save the information given in the Notepad program at the end of the installation (see
Figure 1). This information will give you the password and other necessary information to get
DoorsNXT working properly.
2.2 Setup Client
Once the software has been installed. The first Client must be configured.
NOTE: Licensing for the first Client is included. To use additional clients concurrently, contact Keri
Systems for additional licenses.
1. Open up Windows Explorer and locate the DoorsNXT installation. Click on the folder created for
the first Client. The number of Clients available is determined by the selections made in the
software installation process and will vary depending on installation.
2. Double-click on the DoorsNXT application. DoorsNXT will open to the Connection Settings
window (see Figure 3 on page 5).