Keri Systems Doors NetXtreme - Manual (Page 49)

Figure 44: Create In/Out Reader Access Group
Keri Systems, Inc. Doors NetXtreme TM Reference Manual
01945-100 Rev. 4.0 Page 47
12.5 Create In/Out Reader Access Group
Click on Setup > Access Groups.
1. Click on the “Add Access Group” button.
2. Give the access group a name that will make it easy to identify. Using the direction of the reader in
the sequence name is recommended.
3. Select the door(s) to be used as an In/Out Reader by clicking in the small box.
4. Using the drop-down menu, select the Timezone for the first reader.
5. Using the drop-down menu, select the desired directional Action Sequence (i.e. in).
6. Using the drop-down menu, select the Timezone for the second reader.
7. Using the drop-down menu, select the desired directional Action Sequence (i.e. out).
8. Click on the “Apply Changes” button.
NOTE: See the section “Enroll Users” on page 41 for instructions on assigning access groups to users.