beautypg.com

2 create a new operator – Keri Systems Doors NetXtreme User Manual

Page 17

background image

Figure 12: Setup Operators

Keri Systems, Inc.

Doors NetXtreme

TM

Reference Manual

01945-100 Rev. 4.0

Page 15

4.2

Create a New Operator

Setup > Operators and Security Levels > Operators (tab).

NOTE: As this area deals with security issues, it is recommended that only authorized personnel are
present when entering and viewing operator names and passwords.

1. Click on

.

2. Click in the “Show Passwords” box.
3. Rename the Operator Name (name is limited to 32 characters in length).
4. Enter a password that the operator can remember.

NOTE: The operator name and password fields are both case sensitive. That is, the program
differentiates between UPPERCASE and lowercase in all three fields. Please keep this in mind when
creating operator names and passwords.

5. Assign a Security Level by using the drop-down menu. Security Levels should have been created in

“Create a New Security Level” on page 12.

6. Click on

to save the new operator or

to clear it without saving.

7. To delete an Operator, click on the row to be deleted and click

, followed by

.

NOTE: At this time it is possible to delete settings that are currently in use elsewhere in the software.
Doing this will cause the program to not function properly. It is recommended that instead of deleting
any settings, change the name to “UNUSED.” This will be changed in subsequent versions to not allow
deletions of functions that are in use elsewhere in the software.