P cd p acc/dec #1 and #2 selection, Cr.pn acc/dec #1 and #2 selection, P c d p – Toshiba Tosvert VF-A5 User Manual
Page 58: Acc/dec #1 and #2 selection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[ j f - , P n (Panel Control Parameters)
P c d P
Acc/dec #1 and #2 selection
Related parameters
R d 3
Acc/dec #1 and #2 selection
C r.F 3 R d 3 F Acc/dec #1 and #2 switching frequency
Automatic switching of the acc/dec times can be easily performed by combining the use of terminal block input
AD2, acc/dec #1 and #2 selection R d 3 > and acc/dec #1 and #2 switching frequency R d 3 F
(Refer
to
C R O d
in
Cr.
Lit
and
i t *
in
H r .
S t
{*:
0
to
/0)
for
setting
the
terminal
block inputs.)
Time [S]
—>
* Refer to the section on command mode selection ( C R O d in Cr. Ub ) for the selection of the
start/stop command.
* If the start/stop command source is selected to be the operating panel, the acc/dec will function according
to the setting of parameter R d 3 regardless of the state of terminals AD2-CC.
* If the start/stop command source is selected to be the input terminals, acceleration/deceleration #1
and #2 switching will be selected by the terminal input AD2-CC state regardless of the setting of parameter
R d 3 .
52 -