Toshiba Tosvert VF-A5 - Manual (Page 37)

The method for making setting changes is explained below using maximum voltage frequency ( C <-.F ,
, L >1) as an example.
Key operation LED display Operation
D.D Operating frequency is displayed (standard monitor mode)
1)
PRO
i C r . U
The mode changes from standard monitor mode to
parameter setting mode. C i - . U , the first group name,
will be displayed.
2
)
A V
:Cr.u
l
' . C r . F
Select the desired group name with the AV keys.
When the desired group name is displayed, press
ENTER to display the parameter names in that group.
3)
A V
: f h
l
: u L I
Select the name of the parameter to be changed with the
AV keys.
4) When the desired parameter name is displayed, press
ENTER
l u L 1 ENTER
1
ENTER to display the current parameter value.
;£D.D
5)
A V
:5D.D
l u L I
^ 5 0.0
l u L I
Change the parameter value with the a V keys.
When the desired parameter value is displayed, press
ENTER to save it. After the parameter name and data
are alternately displayed, the parameter name will once
again be displayed.
6) ENTER or PRG or MON
1 1 1
Returns to Returns to Moves to
step 4) above, standard status
monitor
mode.
or I A| V
I
Returns to
step 3) above.
monitor
mode.
Another mode can be moved to in any of the above states by pressing the [ PRG | or | MON | keys.
However, if ENTER is not pressed first after changing a parameter setting value, the new value will not
be saved, and the original setting will be returned to when the power is turned off. Always press the
ENTER key after changing a setting.
-31