Kofax Communication Server 10.0.0 User Manual
Page 41
TC/WEB
TCWEB_USER_60100
©Kofax
41 / 77
2.7.7 Job Notifications
TC/Broadcast only:
A user can select to send notifications for three job
events:
When a job is started.
When a job is completed.
When a job changes to an error state.
For each job event it is possible to set up to 9
addresses that should receive a notification.
Each notification address requires a service and a
number. The Attention field is optional.
For the end notification of a job a user can select to
send a notification on successful and/or
unsuccessful termination.
If a job goes into an error state (some recipients are
not reachable), a user can select if a notification
should be sent, and/or the job should be sent to the
customer care center of the TC/Broadcast service
provider.
Several check boxes allow the behavior of the
notifications to be configured:
Include details for successful
transmission: The Job End Notification will
display details for every address that the
message was successfully delivered to.
Include details for unsuccessful
transmission: The Job End Notification will
display details for every address that the
message could not be delivered to.
Send error report: When a job cannot be
created, send a Job Error Notification.
Intercept on error: When a job cannot
be created, forward the Job Request to the
Problem Job Items tool so a system operator
can correct it.
Resend failed message: If checked, the
job end event creates a new job containing the
failed addresses.
Picture 85: Setting job notifications