KEYENCE TM-3000 Series - Manual (Page 67)

5-21
Set
tin
g Each
Fu
nct
ion
Environment Settings
- Setup software TM-H1 TM-Navigator User’s Manual -
Environment Settings
These settings set the operating environment of the controller.
The environment settings are saved in a separate file (*.ens) from the program file.
Setting Methods
Click the [Controller environment setting] button in the main window to display the [Controller environment setting]
dialog.
For more information about the environment settings, see "TM-3000 Series User's Manual".
Setting items
Detailed
settings
Description
RS-232C Baud rate This sets the transmission speed.
Parity This sets the parity.
Auto-send This sets the auto-send.
Ethernet IP address This sets the IP address of the controller.
Subnet mask This sets the subnet mask.
Gateway This sets the default gateway.
Strobe time This sets the output refresh time (unit: ms) for the strobe signal when using
binary output.
Cable exp mode Turn on this setting when using a 30 m head-controller cable (CB-A30).
Language This switches the interface language on the controller.
Program switch This sets whether to switch programs with the console or with an external
input.
Save When this is turned on, the auto zero and program switching settings are
saved to the FLASH memory.
Keylock When this is turned ON, input cannot be accepted from the console.