KEYENCE TM-3000 Series - Manual (Page 25)

4-3
Displa
ying
the
Measurem
ent Data
- Setup software TM-H1 TM-Navigator User’s Manual -
View measurement value
(3) Measurement control
Inputs a control signal into the connected controller.
For more information about each control signal, see "TM-3000 Series User's Manual".
(4) [Close] button
Closes the [View measurement value] window.
(5) [Help] button
Opens the help menu for TM-Navigator.
Inputs a trigger to the specified head.
: When inputting a trigger to only Head A
: When inputting a trigger to only Head B
: When inputting a trigger to both Head A and Head B
Inputs a TIMING input to the specified TIM.
Assign the TIMING input for each OUT setting by using the [Common] tab.
: When inputting TIMING on only TIM1
: When inputting TIMING on only TIM2
: When inputting TIMING on both TIM1 and TIM2
Inputs an auto-zero for the specified ZERO.
Assign the ZERO input for each OUT setting by using the [Common] tab.
: When inputting auto-zero on only ZERO1
: When inputting auto-zero on only ZERO2
: When inputting auto-zero on both ZERO1 and ZERO2
Resets the measured values that are displayed.