KEYENCE TM-3000 Series User Manual

Page 26

4-4

- Setup software TM-H1 TM-Navigator User’s Manual -

View measurement value

Displa

ying

the

Measurem

ent Data

Operating the [View measurement value]

window

Connect TM-Navigator and the

controller, check that communication

can be established, and then measure

the target.

"Connecting via USB" (page 1-7)

Click the [View measurement value]

icon on the tool bar.

The [View measurement value] window appears.

• Select [View measurement value] from the

[Display] menu.

• Press the "F-5" key.

Click the [Measurement value acquisition

start] button.

The measurements for the OUT settings that are

configured in the controller appear in the window.

Reference

• If communication is not possible between TM-Navigator

and the controller, or if a head is not connected, the

following dialog appears shortly after clicking the

[Measurement value acquisition start] button or

[Trigger] button.

Check the connection between each head and

between TM-Navigator and the controller.

For more information about the OUT settings, see

"TM-3000 Series User's Manual".

Alternative