KEYENCE TM-3000 Series - Manual (Page 63)

5-17
Set
tin
g Each
Fu
nct
ion
Setting Items
- Setup software TM-H1 TM-Navigator User’s Manual -
Binary output
This setting configures the binary output.
For details, see "TM-3000 Series User's Manual".
Analog output
This setting configures the analog output.
For details, see "TM-3000 Series User's Manual".
Setting items Description
Binary output settings This configures the binary output settings for each OUT setting.
Check the [Judgment] checkbox to use the tolerance comparators instead of the
binary output.
All ON This checks all of the checkboxes.
All OFF This unchecks all of the checkboxes.
Setting items Description
CH1 output selection This selects the OUT setting to output with CH1.
CH1 analog scaling This sets the output voltage value for CH1 compared to the measurement value.
CH2 output selection This selects the OUT setting to output with CH2.
CH2 analog scaling This sets the output voltage value for CH2 compared to the measurement value.