KEYENCE TM-3000 Series User Manual

Page 42

4-20

- Setup software TM-H1 TM-Navigator User’s Manual -

Image Storage

Displa

ying

the

Measurem

ent Data

(1) [Start image storage] button

Starts storing the image data from the controller.

(2) [Stop storage] button

Stops storing the image data from the controller.

(3) [Clear storage data] button

Clears all of the image data that is stored in the internal memory of the controller.

(4) [Re-measure (Ref.Value)] button

This function changes or confirms the measurement settings using saved images.

The confirmed setting conditions can be saved and sent to the controller.

(5) [Help:Ref.Value] button

The help file for Re-measure (Ref.Value) is displayed.

(6) [Image storage] button

Displays the [Image storage] dialog box.

This dialog box can be used to configure the controller's image storage settings.

(7) Num. of image

Displays the number of images that are stored on the controller.

(8) Current status

Displays the storage status (Storing / Stopped)

(9) Image No.

Displays the number of images and selects the image No. that is displayed on the view image area.

(10)Acquisition Date

Displays the date and time when the image selected for (9) Image No. was stored on the controller.

(11)[Delete Image] button

Deletes the displayed image data.

(12)[Read storage data] button

Reads the image data in the connected controller on TM-Navigator.