KEYENCE TM-3000 Series - Manual (Page 50)

5-4
Set
tin
g Each
Fu
nct
ion
Setting Items
- Setup software TM-H1 TM-Navigator User’s Manual -
Setting window (Head A / Head B)
Setting items Description
(1) Capture image This captures the latest image from the controller only once and displays the
image on the view image area.
(2) Start continuous capture This captures the latest image from the controller in succession and displays the
images on the view image area.
(3) Trigger When the trigger mode is "External trigger", a trigger is input by clicking the
[Trigger] button.
(4) Measure range (X / Y) This sets the measurement range for X direction and Y direction.
(5) Measure range display This displays the range actually measured based on the setting in (4).
(6) Mask setting / Preview This sets the mask areas (Mask1 to Mask5) or deletes them.
Clicking [Preview mask] button displays the image and the mask area on the
view image area.
(7) Threshold setting The sets the threshold to judge as bright or dark.
Clicking Light intensity screen (X) or (Y) displays each screen and cursor.
"Light intensity (X)/Light intensity (Y) screen" (page 5-5)
(8) OK This confirms the set contents and closes the window.
(9) Cancel This cancels the set contents and closes the window.
(10) View image area This displays images and mask areas.
(1)
(5)
(10)
(6)
(2) (3)
(4)
(7)
(8)
(9)