Sending and receiving settings, Sending all settings, Receiving all settings – KEYENCE TM-3000 Series User Manual

Page 22: Sending and receiving settings -4, Sending all settings -4 receiving all settings -4

3-4

Operat

ion

s wit

h t
h

e Set

ting

File

- Setup software TM-H1 TM-Navigator User’s Manual -

Sending and Receiving Settings

This section describes how to transmit all settings

between TM-Navigator and the controller.

Settings that are changed in TM-Navigator are updated

to the controller immediately after being sent. Settings

from the controller are reflected to TM-Navigator

immediately after being received.

This function transmits the following data to the controller.
• All of the settings for program No. 0 to 15 (Head

settings, Master registration, Position correction,

Measurement settings, OUT settings, Common

settings)

• Controller environment settings

Sending All Settings

Connect TM-Navigator and the

controller, and check that

communication is normal.

"Connecting via USB" (page 1-7)

Click the [Send settings to controller]

icon on the tool bar.

Select [Send the settings to the controller] from the

[Comm] menu.

The [Communicating] dialog appears.

The dialog closes when sending the settings is

complete.

Receiving All Settings

Connect TM-Navigator and the controller,

and check that communication is normal.

"Connecting via USB" (page 1-7)

Click the [Receive settings from

controller] icon of the tool bar.

Select [Receive the settings from the controller] from

the [Comm] menu.

The [Communicating] dialog appears.

The dialog closes when receiving the settings is

complete.

Alternative