KEYENCE TM-3000 Series - Manual (Page 24)

4-2
- Setup software TM-H1 TM-Navigator User’s Manual -
Displa
ying
the
Measurem
ent Data
View measurement value
View measurement value
This section describes displaying the values measured with the controller in real time on the TM-Navigator.
Functions and Display
The values measured by the controller can be displayed in real time in the [View measurement value] window.
Measurement controls to the controller such as a trigger and timing input can also be performed.
(1) [Measurement value acquisition start] button
Displays the values being measured by the controller in real time on TM-Navigator.
(2) View measurement value
Displays the measurement result from the controller for each OUT setting.
The values for all of the OUT settings (OUT1 to OUT16) that are set on the controller are displayed.
Displayed while the measurement value acquisition is stopped. Click this button to start
receiving measurement values.
Displayed while the measurement values are being received. Click this button during
measurement to stop receiving the values.
(1)
(2)
(4) (5)
(3)
Tolerance evaluation output Timing/Zero display Measurement value