KEYENCE TM-3000 Series User Manual
Page 17
2-3
Main Win
dow
Main Window
- Setup software TM-H1 TM-Navigator User’s Manual -
(3) Setting and operation area for program settings
Switches the program No. of which the setting will be changed.
* "Copy", "Paste", and "Initialization" act on the following settings:
• Head Settings
• Master Registration (including the master image)
• Position Correction
• Measurement Settings
• OUT Settings
• Common Settings
Configures the settings for storing measurement data in the controller.
Stored data can be displayed on TM-Navigator or saved as a file on the computer.
Configures the settings for storing measured image data in the controller.
Stored image data can be displayed on TM-Navigator or saved as a file on the computer.
No. 0 to 15
The settings for the selected program No. can be checked and changed. (Program No.)
Clicking on the selected program No. changes the color of the button to blue.
Clicking on this button displays the preceding program No.
Clicking on this button displays the following program No.
Edit program name
Clicking on this button displays the [Edit program name] dialog. Set the program name in this
dialog box.
Reference
• Enter up to 16 characters for the program name.
• Letters and numbers can be used for the program name.
Copy
Copies the settings* in the currently selected program No. for pasting.
Paste
Pastes the settings* that were copied by using the [Copy] button into the program No. that is
being edited.
Initialization
Initializes the settings* in the currently selected program No.
Global initialization
Initializes the settings* for all of the program No. 0 to 15.
The currently displayed program
No. is shown.