KEYENCE TM-3000 Series - Manual (Page 40)

4-18
- Setup software TM-H1 TM-Navigator User’s Manual -
Data Storage
Displa
ying
the
Measurem
ent Data
Transferring the storage data to Excel
The storage data loaded to TM-Navigator from the
controller can be loaded to an Excel file.
Reference
"Re-measure (Ref.Value)" data cannot be loaded.
1
Connect TM-Navigator and the
controller, check that communication
can be established, and then measure
the target.
"Connecting via USB" (page 1-7)
"Connecting via Ethernet" (page 1-9)
2
Click the [Start storage] button.
"Starting data storage" (page 4-17)
3
Click the [Read storage data] button.
The storage data is loaded into TM-Navigator.
4
Click the [Excel transfer start] button on
the [Data storage] window.
The [Excel setting] window appears.
(1) Forward sheet name
Enter the Excel sheet name to which the data is
to be transferred.
(2) Transfer list
Check the items to be transferred.
Items (date or OUT number) and the cell number
of the first row to be transferred are displayed.
(3) Start writing cell
Specify which cell to begin transferring data to.
(4) [All ON] button
Check marks are added to all of the items.
(5) [All OFF] button
Check marks are removed from all of the items.
(6) [Transfer] button
When the button is clicked, Excel starts up and
the measurement values are entered in the
specified cells.
(7) [Cancel] button
This cancels the set contents and closes the
[Excel setting] window.
5
Click the [Transfer] button.
Excel starts up and is displayed. Then, the data is
transferred to the specified sheet.
(1)
(6)
(2)
(7)
(3)
(4)
(5)