KEYENCE TM-3000 Series - Manual (Page 58)

5-12
Set
tin
g Each
Fu
nct
ion
Setting Items
- Setup software TM-H1 TM-Navigator User’s Manual -
Measurement type
The target head and measurement type (mode) set for the measurement settings are displayed.
Clicking [Preview] button displays the master image and measurement area.
Measurement conditions
The measurement conditions can be set in the following range.
Minimum display unit
The minimum display unit can be set in the following range.
The display ranges for offset, scaling setting and tolerance setting will also be changed in addition to the display range
for the measured value.
* The setting range varies depending on the measurement mode.
For details, see "TM-3000 Series User's Manual".
Setting items Setting range Default value
Average measure 1 / 2 / 4 / 8 / 16 / 32 / 64 / 128 / 256 / 512 / 1024 / 2048 / 4096 1
Alarm error 0 to 255 0
Measurement
mode
Normal / Peak hold 1 /Bottom hold 1 /
P-to-p hold 1 / Average hold 1 /
Peak hold 2 / Average hold 2 /P-to-p hold 2 /
Average hold 2 / Sample hold
Normal
Offset 0.000 to 999.999 0.000
Setting items Setting range Default value
Min display unit
*
1 mm / 0.1 mm / 0.01 mm / 0.001 mm / 1 Pm / 0.1 Pm / 0.01 Pm
1 mm
2
/ 0.1 mm
2
/ 0.01 mm
2
/ 0.001 mm
2
/ 0.0001 mm
2
1 deg / 0.1 deg / 0.01 deg
0.001 mm