2 macfilter addsrc, 3 macfilter addsrc all, Switching commands at8904m – Kontron AT8904 CLI User Manual
Page 94
Switching Commands
AT8904M
AT8904M CLI Reference Manual
Page 2 - 58
Format
macfilter
Mode
Global Config
2.14.1.1
no macfilter
This command removes all filtering restrictions and the static MAC filter entry for the
MAC address
on the VLAN
. The
parameter must be
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
parameter must identify a valid VLAN.
Format
no macfilter
Mode
Global Config
2.14.2
macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the
MAC address of
be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
parameter must identify a valid VLAN.
Format
macfilter addsrc
Mode
Interface Config
2.14.2.1
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the
MAC address of
and VLAN of
. The
must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
parameter must identify a valid VLAN.
Format
no macfilter addsrc
Mode
Interface Config
2.14.3
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the
MAC address of
and
. You must specify the
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
parameter must identify a valid VLAN.
Format
macfilter addsrc all
Mode
Global Config
2.14.3.1
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the
MAC address of
and VLAN of
. You must specify the
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
parameter must identify a valid VLAN.
Format
no macfilter addsrc all