Kontron AT8904 CLI - Manual (Page 209)

AT8904M Utility Commands
Page 5 - 9 AT8904M CLI Reference Manual
on the network (excluding framing bits but including Frame
Check Sequence (FCS) octets). This object can be used as a
reasonable estimate of Ethernet utilization. If greater
precision is desired, the etherStatsPkts and etherStatsOc-
tets objects should be sampled before and after a common
interval. The result of this equation is the value Utili-
zation which is the percent utilization of the Ethernet
segment on a scale of 0 to 100 percent.
Packets Received 64 Octets - The total number of packets
(including bad packets) received that were 64 octets in
length (excluding framing bits but including FCS octets).
Packets Received 65-127 Octets - The total number of pack-
ets (including bad packets) received that were between 65
and 127 octets in length inclusive (excluding framing bits
but including FCS octets).
Packets Received 128-255 Octets - The total number of
packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets Received 256-511 Octets - The total number of
packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets Received 512-1023 Octets - The total number of
packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets Received 1024-1518 Octets - The total number of
packets (including bad packets) received that were between
1024 and 1518 octets in length inclusive (excluding fram-
ing bits but including FCS octets).
Packets Received > 1522 Octets - The total number of pack-
ets received that were longer than 1522 octets (excluding
framing bits, but including FCS octets) and were otherwise
well formed.
Packets RX and TX 64 Octets - The total number of packets
(including bad packets) received and transmitted that were
64 octets in length (excluding framing bits but including
FCS octets).
Packets RX and TX 65-127 Octets - The total number of
packets (including bad packets) received and transmitted
that were between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).
Packets RX and TX 128-255 Octets - The total number of
packets (including bad packets) received and transmitted
that were between 128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).
Packets RX and TX 256-511 Octets - The total number of
packets (including bad packets) received and transmitted
that were between 256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).
Packets RX and TX 512-1023 Octets - The total number of
packets (including bad packets) received and transmitted
that were between 512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).
Packets RX and TX 1024-1518 Octets - The total number of
packets (including bad packets) received and transmitted