4 cos-queue min-bandwidth, 5 cos-queue strict, 6 traffic-shape – Kontron AT8904 CLI User Manual
Page 172: Cos-queue min-bandwidth - 4, Cos-queue strict - 4, Traffic-shape - 4, Quality of service (qos) commands at8904m
Quality of Service (QoS) Commands
AT8904M
AT8904M CLI Reference Manual
Page 4 - 4
4.1.4
cos-queue min-bandwidth
This command specifies the minimum transmission bandwidth guarantee for each
interface queue. The total number of queues supported per interface is platform
specific. A value from 0-100 (percentage of link rate) must be specified for each
supported queue, with 0 indicating no guaranteed minimum bandwidth. The sum of all
values entered must not exceed 100.
Format
cos-queue min-bandwidth
Modes
Global Config
Interface Config
4.1.4.1
no cos-queue min-bandwidth
This command restores the default for each queue's minimum bandwidth value.
Format
no cos-queue min-bandwidth
Modes
Global Config
Interface Config
4.1.5
cos-queue strict
This command activates the strict priority scheduler mode for each specified queue.
Format.
cos-queue strict
n>]
Modes
Global Config
Interface Config
4.1.5.1
no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
Format
no cos-queue strict
id-n>]
Modes
Global Config
Interface Config
4.1.6
traffic-shape
This command specifies the maximum transmission bandwidth limit for the interface
as a whole. Also known as rate shaping, traffic shaping has the effect of smoothing
temporary traffic bursts over time so that the transmitted traffic rate is bounded.
Format
traffic-shape
Modes
Global Config
Interface Config
4.1.6.1
no traffic-shape
This command restores the interface shaping rate to the default value.
Format
no traffic-shape