Kontron AT8904 CLI - Manual (Page 198)

Quality of Service (QoS) Commands AT8904M
AT8904M CLI Reference Manual Page 4 - 30
Action The action associated with each rule. The possible values are Permit or
Deny.
Match All Indicates whether this access list applies to every packet. Possible val-
ues are True or False.
Protocol The protocol to filter for this rule.
Source IP Address The source IP address for this rule.
Source IP Mask The source IP Mask for this rule.
Source L4 Port Keyword The source port for this rule.
Destination IP Address The destination IP address for this rule.
Destination IP Mask The destination IP Mask for this rule.
Destination L4 Port Keyword The destination port for this rule.
IP DSCP
The value specified for IP DSCP.
IP Precedence The value specified IP Precedence.
IP TOS
The value specified for IP TOS.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.
Mirror Interface The slot/port to which packets matching this rule are copied.
Redirect Interface The slot/port to which packets matching this rule are forwarded.
4.8.5 show access-lists
This command displays IP ACLs and MAC access control lists information for a
designated interface and direction.
Format
show access-lists interface <slot/port> in
Mode Privileged EXEC
ACL Type Type of access list (IP or MAC).
ACL ID Access List name for a MAC access list or the numeric identifier for
an IP access list.
Sequence Number An optional sequence number may be specified to indicate the
order of this access list relative to other access lists already assigned to
this interface and direction. A lower number indicates higher prece-
dence order. If a sequence number is already in use for this interface
and direction, the specified access list replaces the currently attached
access list using that sequence number. If the sequence number is not
specified by the user, a sequence number that is one greater than the
highest sequence number currently in use for this interface and direc-
tion is used. Valid range is (1 to 4294967295).