Kontron AT8904 CLI - Manual (Page 155)

AT8904M Routing Commands
Page 3 - 41 AT8904M CLI Reference Manual
3.7.45 show ip ospf database database-summary
Use this command to display the number of each type of LSA in the database for each
area and for the router. The command also displays the total number of LSAs in the
database.
Format
show ip ospf database database-summary
Modes Privileged EXEC
User EXEC
Router Total number of router LSAs in the OSPF link state database.
Network Total number of network LSAs in the OSPF link state database.
Summary Net Total number of summary network LSAs in the database.
Summary ASBR Number of summary ASBR LSAs in the database.
Type-7 Ext
Total number of Type-7 external LSAs in the database.
Self-Originated Type-7 Total number of self originated AS external LSAs in the
OSPFv3 link state database.
Opaque Link Number of opaque link LSAs in the database.
Opaque Area Number of opaque area LSAs in the database.
Subtotal
Number of entries for the identified area.
Total Number of entries for all areas.
3.7.46 show ip ospf interface
This command displays the information for the IFO object or virtual interface tables.
Format
show ip ospf interface
{<slot/port> | loopback }
Modes Privileged EXEC
User EXEC
IP Address The IP address for the specified interface.
Subnet Mask A mask of the network and host portion of the IP address for the OSPF
interface.
OSPF Admin Mode States whether OSPF is enabled or disabled on a router inter-
face.
OSPF Area ID The OSPF Area Id for the specified interface.
Router Priority A number representing the OSPF Priority for the specified interface.
Retransmit Interval A number representing the OSPF Retransmit Interval for the
specified interface.
Hello Interval A number representing the OSPF Hello Interval for the specified inter-
face.
Dead Interval A number representing the OSPF Dead Interval for the specified inter-
face.
LSA Ack Interval A number representing the OSPF LSA Acknowledgement Interval
for the specified interface.