Kontron AT8904 CLI - Manual (Page 235)

AT8904M Utility Commands
Page 5 - 35 AT8904M CLI Reference Manual
Default
1 (day)
Format
lease [{ [] [] | infinite}]
Mode
DHCP Pool Config
5.8.8.1 no lease
This command restores the default value of the lease time for DHCP Server.
Format
no lease
Mode
DHCP Pool Config
5.8.9 network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool
on the server. Network-number is a valid IP address, made up of four decimal bytes
ranging from 0 to 255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the
specified address pool. The prefix-length is an integer from 0 to 32.
Default
none
Format
network [{ | }]
Mode
DHCP Pool Config
5.8.9.1 no network
This command removes the subnet number and mask.
Format
no network
Mode
DHCP Pool Config
5.8.10 bootfile
The command specifies the name of the default boot image for a DHCP client. The
specifies the boot image file.
Format
bootfile
Mode
DHCP Pool Config
5.8.10.1 no bootfile
This command deletes the boot image name.
Format
no bootfile
Mode
DHCP Pool Config
5.8.11 domain-name
This command specifies the domain name for a DHCP client. The specifies
the domain name string of the client.
Default
none
Format
domain-name
Mode
DHCP Pool Config