Kontron AT8904 CLI - Manual (Page 239)

AT8904M Utility Commands
Page 5 - 39 AT8904M CLI Reference Manual
Mode
Global Config
5.8.20 ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Default
enabled
Format
ip dhcp conflict logging
Mode
Global Config
5.8.20.1 no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
no ip dhcp conflict logging
Mode
Global Config
5.8.21 clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database.
If “*” is specified, the bindings corresponding to all the addresses are deleted.
is a valid IP address made up of four decimal bytes ranging from 0 to 255.
IP address 0.0.0.0 is invalid.
Format
clear ip dhcp binding {
Mode
Privileged EXEC
5.8.22 clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Format
clear ip dhcp server statistics
Mode
Privileged EXEC
5.8.23 clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The
server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*)
character is used as the address parameter.
Default
none
Format
clear ip dhcp conflict {
Mode
Privileged EXEC
5.8.24 show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP
server. If no IP address is specified, the bindings corresponding to all the addresses are
displayed.
Format
show ip dhcp binding [
Modes
Privileged EXEC
User EXEC