Kontron AT8904 CLI - Manual (Page 129)

AT8904M Routing Commands
Page 3 - 15 AT8904M CLI Reference Manual
3.3.3.1 no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the
router advertisement sent from this interface.
Format
no ip irdp holdtime
Mode Interface Config
3.3.4 ip irdp maxadvertinterval
This command configures the maximum time, in seconds, allowed between sending
router advertisements from the interface. The range for maxadvertinterval is 4 to 1800
seconds.
Default
600
Format
ip irdp maxadvertinterval
<4-1800>
Mode Interface Config
3.3.4.1 no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
Format
no ip irdp maxadvertinterval
Mode Interface Config
3.3.5 ip irdp minadvertinterval
This command configures the minimum time, in seconds, allowed between sending
router advertisements from the interface. The range for minadvertinterval is three to the
value of maxadvertinterval.
Default
0.75 * maxadvertinterval
Format
ip irdp minadvertinterval
<3-maxadvertinterval>
Mode Interface Config
3.3.5.1 no ip irdp minadvertinterval
This command sets the default minimum time to the default.
Format
no ip irdp minadvertinterval
Mode Interface Config
3.3.6 ip irdp preference
This command configures the preferability of the address as a default router address,
relative to other router addresses on the same subnet.
Default
0
Format
ip irdp preference
<-2147483648 to 2147483647>
Mode Interface Config