Kontron AT8904 CLI - Manual (Page 240)

Utility Commands AT8904M
AT8904M CLI Reference Manual Page 5 - 40
IP address
The IP address of the client.
Hardware Address
The MAC address or the client identifier.
Lease expiration
The lease expiration time of the IP address assigned to
the client.
Type
The manner in which IP address was assigned to the client.
5.8.25 show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP
server. If no IP address is specified, the bindings corresponding to all the addresses are
displayed.
Format
show ip dhcp global configuration
Modes
Privileged EXEC
User EXEC
Service DHCP
The field to display the status of dhcp protocol.
Number of Ping Packets
The maximum number of Ping Packets that will be
sent to verify that an ip address id not already assigned.
Conflict Logging
Shows whether conflict logging is enabled or disabled.
BootP Automatic
Shows whether BootP for dynamic pools is enabled or
disabled.
5.8.26 show ip dhcp pool configuration
This command displays pool configuration. If
all
is specified, configuration for all the
pools is displayed.
Format
show ip dhcp pool configuration { | all}
Modes
Privileged EXEC
User EXEC
Pool Name
The name of the configured pool.
Pool Type
The pool type.
Lease Time
The lease expiration time of the IP address assigned to
the client.
DNS Servers
The list of DNS servers available to the DHCP client
Default Routers
The list of the default routers available to the DHCP
client
The following additional field is displayed for Dynamic pool type:
Network
The network number and the mask for the DHCP address pool.
The following additional fields are displayed for Manual pool type:
Client Name
The name of a DHCP client.
Client Identifier
The unique identifier of a DHCP client.
Hardware Address
The hardware address of a DHCP client.
Hardware Address Type
The protocol of the hardware platform.