Kontron AT8904 CLI - Manual (Page 176)

Quality of Service (QoS) Commands AT8904M
AT8904M CLI Reference Manual Page 4 - 8
4.2.1.1 no diffserv
This command sets the DiffServ operational mode to inactive. While disabled, the
DiffServ configuration is retained and can be changed, but it is not activated. When
enabled, Diffserv services are activated.
Format
no diffserv
Mode Global Config
4.3 DiffServ Class Commands
Use the DiffServ class commands to define traffic classification. To classify traffic,
you specify Behavior Aggregate (BA), based on DSCP and Multi-Field (MF) classes
of traffic (name, match criteria)
This set of commands consists of class creation/deletion and matching, with the class
match commands specifying Layer 3, Layer 2, and general match criteria. The class
match criteria are also known as class rules, with a class definition consisting of one or
more rules to identify the traffic that belongs to the class.
NOTE: Once you create a class match criterion for a class, you cannot change
or delete the criterion. To change or delete a class match criterion, you
must delete and re-create the entire class.
The CLI command root is
class-map
.
4.3.1 class-map
This command defines a DiffServ class of type match-all. When used without any
match condition, this command enters the class-map mode. The
is
a case sensitive alphanumeric string from 1 to 31 characters uniquely identifying an
existing DiffServ class.
NOTE: The class-map-name 'default' is reserved and must not be used.
The class type of
match-all
indicates all of the individual match conditions must be
true for a packet to be considered a member of the class.
NOTE: The CLI mode is changed to Class-Map Config when this command is
successfully executed.
Format
class-map match-all
Mode Global Config
4.3.1.1 no class-map
This command eliminates an existing DiffServ class. The is the
name of an existing DiffServ class ( The class name 'default' is reserved and is not
allowed here). This command may be issued at any time; if the class is currently
referenced by one or more policies or by any other class, the delete action fails.
Format
no class-map
Mode Global Config