Kontron AT8904 CLI - Manual (Page 222)

Utility Commands AT8904M
AT8904M CLI Reference Manual Page 5 - 22
Default
514
Format
logging port
Mode
Global Config
5.4.7.1 no logging port
This command resets the local logging port to the default.
Format
no logging port
Mode
Global Config
5.4.8 logging syslog
This command enables syslog logging. The parameter is an integer with a
range of 1-65535.
Default
disabled
Format
logging syslog [port ]
Mode
Global Config
5.4.8.1 no logging syslog
This command disables syslog logging.
Format
no logging syslog
Mode
Global Config
5.4.9 show logging
This command displays logging configuration information.
Format
show logging
Mode
Privileged EXEC
Logging Client Local Port
Port on the collector/relay to which syslog
messages are sent.
CLI Command Logging
Shows whether CLI Command logging is enabled.
Console Logging
Shows whether console logging is enabled.
Console Logging Severity Filter
The minimum severity to log to the console
log. Messages with an equal or lower numerical severity
are logged.
Buffered Logging
Shows whether buffered logging is enabled.
Syslog Logging
Shows whether syslog logging is enabled.
Log Messages Received
Number of messages received by the log process.
This includes messages that are dropped or ignored.
Log Messages Dropped
Number of messages that could not be processed due
to error or lack of resources.
Log Messages Relayed
Number of messages sent to the collector/relay.