Kontron AT8904 CLI - Manual (Page 246)

Utility Commands AT8904M
AT8904M CLI Reference Manual Page 5 - 46
5.10.9 show vlan multicast
This command displays the VLAN based multicast handling. The command displays
for a specified VLAN ID (range is 1-4094) or all created VLANs (inclusive default
VLAN) the multicast flooding settings. The displayed fields are
• the VLAN Identifier (VID) associated with each VLAN
• the VLAN type (default, static or dynamic)
• the multicast flooding, indicating whether a packet with unregistered multicast
address should be flooded or not (yes/no).
Format
show vlan multicast <1-4094>
show vlan multicast all
Mode
Privileged Exec
5.11 Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions
affecting their FASTPATH product.
CAUTION: The output of “debug” commands can be long and may adversely
affect system performance.
5.11.1 debug console
This command enables the display of “debug” trace output on the login session in
which it is executed. Debug console display must be enabled in order to view any trace
output. The output of debug trace commands will appear on all login sessions for
which debug console has been enabled. The configuration of this command remains in
effect for the life of the login session. The effect of this command is not persistent
across resets.
Default
disabled
Format
debug console
Mode
Privileged EXEC
5.11.1.1 no debug console
This command disables the display of “debug” trace output on the login session in
which it is executed.
Format
no debug console
Mode
Privileged EXEC
5.11.2 debug clear
This command disables all previously enabled “debug” traces.
Default
none
Format
debug clear
Mode
Privileged EXEC