Kontron AT8904 CLI - Manual (Page 32)

Using the Command-Line Interface AT8904M
AT8904M CLI Reference Manual Page 1 - 6
Table 6 explains how to enter or exit each mode.
Line Config
Switch (line)#
Allows you to configure
various telnet settings
and the console interface.
Policy Map
Config
Switch (Config-policy-map)#
Allows you to access the
QoS Policy-Map config-
uration mode to config-
ure the QoS Policy-Map.
Policy Class
Config
Switch (Config-policy-class-map)#
Consists of class cre-
ation, deletion, and
matching commands.
The class match com-
mands specify Layer 2,
Layer 3, and general
match criteria.
Class Map Con-
fig
Switch (Config-class-map)#
Allows you to access the
QoS Class-Map configu-
ration mode to configure
QoS class maps.
Router OSPF
Config
Switch (Config-router)#
Allows you to access the
OSPF configuration
commands.
Router RIP Con-
fig
Switch (Config-router)#
Allows you to access the
RIP configuration com-
mands.
MAC Access-list
Config
Switch (Config-mac-access-list)#
Allows you to create a
MAC Access-List and to
enter the mode contain-
ing Mac Access-List
configuration com-
mands.
TACACS Config
Switch (Tacacs)#
Allows you to configure
properties for the
TACACS servers.
DHCP Pool
Config
Switch (Config dhcp-pool)#
Allows you to access the
DHCP Pool configura-
tion.
Table 6. CLI Mode Access and Exit
Command
Mode
Access Method
Exit or Access Previous
Mode
User EXEC This is the first level of access. To exit, enter
logout
.
Privileged EXEC From the User EXEC mode, enter
enable
.
To exit to the User EXEC
mode, enter
exit
or press
Ctrl-Z
.
Table 5. CLI Command Modes
Command
Mode
Prompt Mode Description