AVer XR8032_RACK - Manual (Page 95)

89
- Smart Recording
Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there
is no motion, it records at the minimum frame rate.
- Voice Detecting Recording
DVR system will record when the voice exceeds the intensity value in Voice Detection setting.
- No Recording
The system won’t do any recording.
Network Setting
In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and
click Default to revert back to original factory setting. For the network service ports that use by DVR server,
please see
Appendix A .
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(1) Server Name
Assign a name for the DVR unit. Letters of the alphabet and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it accessible via
internet using WebViewer, Remote Console, PDAViewer and HandyViewer (still image). To select all the
cameras, enable the ALL check box.
(3) Dynamic DNS (Domain Name System)
Enter the Domain Name and Password. To use this feature, go to http://ddns.avers.com.tw and register. (see
also Appendix A ) You will be prompted to enter CD key number, product name, password, and user information.
Use this service if the IP address changes each time when you connect to internet.
(4) Remote Control Server
Enable/disable remote control from remote application (ex. CMS). Enter the remote accessing port in Port
column.
(5) Network Video Configuration
Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust bar
to set the Quality level and FrameRate level.
(6) WebViewer Configuration
Activate Enable Anonymous Login to remotely access the DVR server without the need of password. The
default of WebViewer port is 80.
(7)
Voice Phone
Voice Phone is a 2-Way Talk feature that allows the client and server to talk via internet using microphone.
Make sure both microphone and speakers work before using this feature. If the Talk to Web-Client is disabled,