AVer XR8032_RACK - Manual (Page 81)

75
3.10 User Setting
Only administrator can access User Setting. The maximum user accounts are 256.
In the User Setting dialog box, click Add to insert a new user, Delete to remove the selected user, Edit to
modify the user control right, OK to exit and accept the setting, and Cancel to exit without saving the setting.
After clicking Add or Edit, you may customize the user control setting. OK to exit and accept the
setting, and Cancel to exit without saving the setting
(1)
(2)
(3)
(6) (7) (8) (9)
(4)
(5)
(1) Authorization level
Select the status of the user. Only Administrator-level can access User Setting, and reset the Alarm status when
using the Remote Console.
(2) Control Right
Enable the items that would allow the user to access.
(3) Web Viewer
Enable/disable Web Viewer control right that allow the user to operate from a remote location using internet
explorer.
- Remote Console
Allow the user to remote modify DVR system setting.
- Remote LogViewer
Allow the user to view the event log from remote site.
- Remote EMAP
Allow the user to view the E-map of DVR from remote site.
- Remote Record
Allow the user to record video at remote site.
- Remote Setup
Allow the user to modify the DVR system setup from remote site.
- IP Camera
Enable/disable user to add new IP camera when using the Web Viewer.
- Remote Access Time
Enable Infinite check box to access DVR without time limit. If you want to set time limit, enter the number of