AVer XR8032_RACK - Manual (Page 151)

145
next alarm event come in.
i On the DVR site, user need to enable and configure the matrix to send iMatrix (please refer to Alarm
Setting
of DVR manual).
9. Click OK to save the setup. To exit without saving, click Cancel.
10. To delete the monitor set, select the monitor set in Monitor Select windows and click Delete button.
11. To modify the monitor set, select the monitor set in Monitor Select windows and click Edit button.
12. To viewer different monitor set, click Monitor Controller from iMatrix main UI and drag the monitor set to
the monitor and press Apply button.
13. Also, user can call up the PTZ camera control panel by click PTZ button and select the PTZ camera to
operate. The PTZ icon will be available when there are PTZ cameras in Monitor set.
i
- Click right mouse button and drag on screen can enlarge viewing. Click right mouse button again to back to
normal view.
- Press F1 will display DVR information on upper right corner of channel screen. Press F1 again to hide.
- Click on channel to view in full screen. Press Esc to back to multiple channel screens.
- The icon indicates the channel is in preview status.
- The icon indicates the channel is in playback status.