AVer XR8032_RACK - Manual (Page 52)

46
3.2.1 Setup the Object Counting
i
The DVR system only supports 4 channels for object counting.
1. Click Detail to enter the object counting setup window.
2. Enable Detected Regions in Display section. This enables the object counting information show on the
screen. Moving Object will enable the object size frame to show on the screen.
3. Click Region1 and press left button of mouse and drag the area that user wants the object to be counted.
And then, click Region2 and drag another area that user wants the object to be counted, too. Those
selected regions will mark in different color. The system will count the objects that move between the
selected regions.
4. Click Object size to define the detected object dimensions. Press left button of mouse and drag on the
screen. To see the object size frame on screen, enable Moving Object in Display section.
5. Adjust the Sensitive of object detecting.
6. To test the setting, mark the Directions (In/Out) want to be test and click Start. The testing result will show
in Test section.
7. Enable Reset Counter, save statistic report of counter, and set a time period to delete the counter data. Click
Detail to setup reset counter.
- Reset Counter
9 Auto reset counter: Select the counter reset by every hour, every 12 hours, or every day
automatically.
9 Reset the counter now: reset counter manually.
- Statistic Report
9 Save statistic report after counter reset: Enable to save a counter statistic report after counter has
been reset. Click to change the Stored Path.
9 Remove data after: Set a time period to delete the counter data from system hard disk.
9 Move to: Move the counter data to the save location that has been setup by user.