AVer XR8032_RACK User Manual

Page 80

Scene Change

When the camera has been moved, the system will alarm.

1. Select the camera number (0-16) and press right button on the mouse to call up the setup windows. And

then, click the Scene Change Tab.

2. Click

Save

to capture the image for comparing reference. To view the captured image, enable the Show

Reference Image

check box. The captured image will display on screen. The reference image is

sharing with the Missing Object and Suspicious Object function.

3. Mark

the

Enable

check box to setup the condition.

4. Sensitive: Set the system detects sensitivity.
5. Delay Time: Set the lasting time for system to detect the movement.
6. Change Rate: Set the camera movement range which compare with the original position.
7. Enable Mask

Mark an area on the screen to disregards the motion in the marked area and to only monitor outside the
marked area. Mark the Enable Mask check box, click and drag the mask frame on the screen.

To reset all object frames, click Clean. To clean an object frame, click right button of mouse and drag the
object frame that user want to clean.