AVer XR8032_RACK - Manual (Page 48)

42
3.2 Camera Setting
In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click
on the camera icon. The camera icon turns red when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest disabling
it so that the system won’t detect it as video loss error.
(3) Camera
9 Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
9 Name
Change the camera name.
9 Description
Add a short comment.
(4) IP Camera Information
Display the camera information, such as camera protocol, model, video type, IP address, and channel
number
. If the camera hasn’t been configured, those information are blank.
(5) Object Counting
Select the two regions on the screen and the system will count the objects that appear from one selected region
to another selected region.(See also
3.2.1 ).
(6) FaceFinder
To setup the capture of human face image from live or recorded video. (See also
3.2.2 )
(7) IP Camera Setting
Configure the camera for monitoring. Click IP setting to enter configuration interface. Click Save&Exit to save
the setting and exit the IP Camera Setting window. Click Connect to connecting with IP camera right away. To
cancel the setting click Cancel.
-
Protocol: select the brand of camera. Drag down the list and select the brand of camera. User also can
click Search Device to find the selected protocol of camera on the LAN network.
- Model: After selected the protocol of camera, the available model will be list in drag down list. If user is not
sure the camera is which model, click Detect Model to find the correct model of camera. Choosing the
wrong model, user is not able to continue the camera setup.
- Video Format:
select format of IP camera video, if not sure, select Auto.
- Channel: assign a channel for this IP camera.
- IP Camera Site: Enter the IP address and connecting port of the camera. Through the IP address and