AVer XR8032_RACK - Manual (Page 147)

141
8. To delete channels from monitor set, right-click on channel and select Recover.
9. Click arrow button to close the sub window.
[Step1]
Select the montior
[Step2]
Click to expand
the cameras
[Step3]
Drag the camera
to the blank block
[Step5]
Click to close
the sub window
[Step4]
Click to refresh
monitor set
i
Right-click on channel block and select Recover to delete the channel form monitor set.
Familiarizing the Buttons in PTZ Camera Controller
(1)
(11)
(2) (3) (4) (5)
(6)
(7)
(8) (9) (10)
Name Function
(1) Close Exit PTZ camera controller.
(2) Setup Select PTZ cameras.
(3) AutoPan Operate the PTZ cameras automatically based on the selected camera group preset position
number.
(4) Focus +/- Adjust the focus manually to produce clear image.
(5) Zoom +/- Zoom in and out the image.
(6) Direction buttons Adjust and position the focal point of the PTZ camera.
(7) Camera ID pane Display the PTZ camera number that is being operated.
(8) Save Camera
preset position
Save the PTZ camera preset position number. Select the camera and click the preset position
number and save it.
(9) Camera lens
speed controller
Adjust the moving s1peed of the PTZ camera lens.