AVer XR8032_RACK - Manual (Page 100)

94
9 Alarm Button: Enable/disable to active manual alarm function (see also Chapter 2.2#(19) ). To define
alarm message of manually alarm trigger. Click alarm button and select the alarm button # and fill in the
description of alarm button.
7. In (6) Alarm Reset, click the camera number (use W and X to select the alarm) to set the reset condition of
alarm. Once alarm is reset, all alarm action will stop at the moment. If the sensor normal status is high, set
the sensor condition to low.
8. In (7) Action, you may now set the alarm action for the system to perform when the alarm condition is
activated.
9 Launch E-Map
Display mini Emap screen.
9 TV Out
Switch to only display the video on TV from where the alarm is activated.
9 Enlarge Camera View
Switch to only display video in Preview/Advanced mode from where the alarm is activated.
9 Send E-mail
Send an electronic text message. To setup click Detail (see also To Setup Send E-mail ).
9 File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol). To setup click Detail (see also To
Setup FTP ).
9 Start Recording
Record the video from the selected camera. To setup click Detail (see also To Setup Alarm Recording ).
9 Alarm SOP (Standard Operation Procedure)
List the instructions to inform the person of what to do when the alarm is activated. To setup click Detail
(see also
To Setup Alarm SOP ).
9 Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is activated (see also To
Setup CMS Setting )