AVer XR8032_RACK - Manual (Page 49)

43
connecting port, the DVR system can reach and monitor the camera.
- URL:
Besides the IP address, user can enter the URL of the camera, too.
- Authentication:
Mark check box and enter the ID and password for authorizing to connect the camera.
Only if the camera has assign the ID and password for authentication.
- Enable Audio: Enable/disable camera audio recording.
To configure Video, Senor, Relay, and Direct Link by IE of the IP camera, click Detail. Click OK to save the
configuration and exit the setup windows. To reset the configuration back to factory value, click Default.
i The Video, Direct Link by IE, and Advanced Setting setup contents may be varied that depends on the
brand of IP camera supported.
„ General Setting
Adjust the video setting of the selected camera. Click Video Setting to enter video adjustment interface.
- Video Setting
Adjust the Video Size, Frame Rate, Video Quality Mode, Quality, Bright, Contrast, Hue, Saturation and
Sharpness.
- Recording Setting
9 Save Original Format: Save the video that is compressed by IP camera’s compress mode.