AVer XR8032_RACK - Manual (Page 77)

71
3.9.8 To Setup PTZ Preset Point:
Beside the PTZ preset point check box, click Detail. In the Trigger PTZ Preset Setting dialog box, select the
PTZ camera number then select the Enable check box. Select the position of the PTZ camera when the alarm
is activated and ended. For the PTZ camera ended point, user also can select one preset position or Auto Pan
between preset position groups.
3.9.9 To Setup Alarm SOP:
Beside the Alarm SOP check box, click Detail. In the step text boxes, type the standard protocol when the alarm
is activated. When the alarm is activated the Standard Operation Procedure dialog box will appear. Just click
Next
to see the next instruction, Back to see the previous instruction, Finish to end and Abort to terminate.