AVer XR8032_RACK User Manual
Page 127
121
-
Guest Mode
Automatically log in Guest mode when the DVR is executed. In guest mode, the functions are limited to
preview and playback only.
(7) Miscellaneous
Enable the conditions in Miscellaneous section you want the system to perform.
- Beep if no signal
Make sound when the video signal is lost.
- Mandatory Record
Always record video when software is running
- Enable Overlay
To enhance video signal for better video quality.
- Screen Saver
Set a period time to enter screen saver mode when system idle.
- Auto Scan Period
- Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next
video in cycle depending on the set time gap.
- Playback Mode
Select the mode of playback the video.
9
Select date and time: Select the date and time which user wants to playback.
9
Play the last file: Automatically playback the video from the last hour
9
Instant Playback: Automatically playback the video which has just recorded
- Date Format
Select the date format which wants to display in Select date and time playback mode
(8) POS
Advanced
Set from which camera screen to display the data from the POS equipment. To set the text flow, color format,
and POS database export, click Advanced.
6. Mark
Show POS Text
to allow POS data to be display on surveillance screen.
7. If user doesn’t want POS data to be scroll up, mark Stop scroll POS Text and enter the time to delete POS
text at Erase POS text after column.
8. Select the POS data display position on surveillance screen – Left-Top, Left-Bottom, Right-Top, or
Right-Bottom.
9. To change the POS data font and color, click Font.
10. Mark Remove POS data after the POS data will be delete from DVR hard disk on the day that user has
setup.