AVer XR8032_RACK - Manual (Page 59)

53
3.4 Network Setting
I n the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and
click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(1) Server Name
Assign a name for the DVR unit. Alphabet letters and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it accessible via
internet using WebViewer, Remote Console, PDA Viewer and Hand Viewer (still image). To select all the
cameras, enable the ALL check box.
(3) Main Configuration
Set the Server IP and Remote Console Port number. The system will automatically detect your Server IP
address. You need this when accessing DVR server from the remote location via internet. To change the IP
address of DVR server, click Detail button.
(4) Dynamic DNS (Domain Name System)
Enter the Domain Name and Password. To use this feature, go to http://ddns.avers. com.tw and register.(also
see
Appendix A ) You will be prompted to enter serial number, product name, password, and user information.
Use this service if the IP address changes each time when you connect to internet.
(5) Remote Control Server
Enable/disable remote control from remote application (ex. CM3000). Enter the remote accessing port in Port
column. The default value is 5555.
i User also can manually run this function. To run, click Start > Programs > DSS > Tool > Remote
Control Server. The
remote control server icon appears on the taskbar when the remote control
server is enabled. (also see Chapter 10 )
(6) Network Video Configuration
Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust bar
to set the Quality level and FrameRate level.
(7) WebViewer Configuration
Activate Enable Anonymous Login to remotely access the DVR server without the need of password
(8)
Voice Phone
The Talk to Web-Client is to use the 2-Way Talk feature that allows the client and server to talk via internet
using microphone. Make sure both microphone and speakers work before using this feature. If the Talk to