AVer XR8032_RACK - Manual (Page 106)

100
6.4 Familiarizing the Buttons in PTZ Camera Controller
(1)
(11)
(2) (3) (4) (5)
(6)
(7)
(8) (9) (10)
Name Function
(1) Close Exit PTZ camera controller.
(2) Setup Configure PTZ cameras.
(3) AutoPan Operate the PTZ cameras automatically based on the selected camera group preset position
number.
(4) Focus +/- Adjust the focus manually to produce clear image.
(5) Zoom +/- Zoom in and out the image.
(6) Direction buttons Adjust and position the focal point of the PTZ camera.
(7) Camera ID pane
Display the PTZ camera number that is being operated.
(8) Save Camera
preset position
Save the PTZ camera preset position number. Select the camera and click the preset position
number and save it.
(9) Camera lens
speed controller
Adjust the moving speed of the PTZ camera lens.
(10) Camera preset
position number
Move the PTZ camera to the preset point.
(11) Group AutoPan Select to automatically operate PTZ camera in group.