Dell OptiPlex GX280 - Manual (Page 82)

NOTE: Memory purchased from Dell is covered under your computer warranty.
NOTE: On the desktop system, it is necessary to remove the CD/DVD drive in order to remove or replace DIMM 2 and
DIMM 4.
1. Follow the procedures in " Before You Begin ."
2. Carefully press out the securing clip at each end of the memory module connector.
1 memory module
2 securing clip (2)
3. Remove the memory module.
Replacing/Adding Additional Memory
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface
on the computer chassis.
NOTE: Memory purchased from Dell is covered under your computer warranty.
1. Follow the procedures in " Before You Begin ."
2. Press out the securing clip at each end of the memory module connector.