Dell OptiPlex GX280 - Manual (Page 37)

date and time fields.
Use this setting in
conjunction with the
Auto Power On
setting.
Low Power
Mode
When Low Power
Mode is selected,
remote wakeup
events no longer
power up from
Hibernate or Off
unless an additional
NIC card is installed.
NOTE: This setting
affects only the
integrated network
controller.
Remote
Wake-Up
This option allows
the system to power
up when a Network
Interface Controller
or Remote Wakeup-
capable modem
receives a wake up
signal.
Off is the default
setting.
On w/ Boot to
NIC will allow the
computer to attempt
to boot from a
network prior to
using the boot
sequence.
NOTE: Normally,
the system can be
powered up
remotely from
suspend mode,
hibernate mode, or
when powered off.
When Low Power
Mode (in the
Power
Management
menu) is enabled,
the system can only
be powered up
remotely from
Suspend.
Suspend
Mode
The options are S1,
a suspend state
where the computer
is running in a low-
power mode, and
S3, a standby state
where the power is
reduced or turned
off for most
components,
however, system