Processor, Replacing the processor – Dell OptiPlex GX280 User Manual
Page 114
Processor
Dell™ OptiPlex™ GX280 Systems User's Guide
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from
your body before you touch any of your computer's electronic components. You can do so by touching an
unpainted metal surface on the computer chassis.
Replacing the Processor
1. Follow the procedures in "
2. Disconnect the cooling fan power cable from the FAN connector on the
.
3. Disconnect the power cable from the 12VPOWER connector on the
.
CAUTION:
The heat sink can get very hot during normal operation. Be sure that the heat sink has had
sufficient time to cool before you touch it.
4. Remove the heat sink:
a. Press the tab on the green securing clip to remove the clip from the retention base.
NOTE:
Your computer's heat sink may differ in appearance than illustrated below, but is removed and reinstalled
in the same manner.
1 securing clip