Dell OptiPlex GX280 - Manual (Page 350)

1 card retention latch 4 card edge connector
2 alignment guide
5 card connector
3 card
CAUTION: Some network adapters automatically start the computer when they are connected to a
network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet
before installing any cards.
6. Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.
NOTE: If the card is full-length, insert the end of the card into the card guide bracket as you lower the card toward its
connector on the system board. Insert the card firmly into the card connector on the system board.
1 fully seated card