Dell OptiPlex GX280 - Manual (Page 343)

Removing the Floppy Drive
1. Follow the procedures in " Before You Begin ."
2. Remove the drive panel by sliding the drive release latch downward to open the panel, then remove it from the 3
hinges.
3. Disconnect the power and floppy-drive cables from the back of the floppy drive.
4. Remove the floppy drive by sliding and holding the drive release latch downward. Then, slide the drive out of the
computer.
1 floppy drive
2 release latch
Installing the Floppy Drive
1. If you are replacing a floppy drive, remove the shoulder screws from the old drive and attach the screws to the
replacement drive.
2. If you are installing a new floppy drive, remove the drive-panel insert, remove the shoulder screws from the inside of
the drive-panel insert and attach the screws to the new drive.