Dell OptiPlex GX280 User Manual

Page 70

1 floppy-drive connector
2 interposer board
3 lever
4 floppy-drive cable
5 system board floppy-drive connector (DSKT)

4. Attach the power cable to the interposer board on the floppy drive.

5. Connect the floppy-drive cable to the DSKT connector on the

6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

7. Close the computer cover.

(optional).

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

9. Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

10. After you open and close the cover, the chassis intrusion detector, if installed and enabled, causes the following

message to appear on the screen at the next computer start-up:

ALERT! Cover was previously removed.

11.

by changing Chassis Intrusion to On or On-Silent.

NOTE:

If an admin password has been assigned by someone else, contact your network administrator for

information on resetting the chassis intrusion detector.

12.

and use the Diskette Drive option to enable your new floppy drive.

13. Verify that your computer works correctly by running the