Installing a hard drive – Dell OptiPlex GX280 User Manual

Page 209

1 hard-drive cable
2 power cable

2. Press in on the tabs on each side of the drive and slide the drive up and out.

1 tabs (2)
2 hard drive

Installing a Hard Drive

1. Check the documentation for the drive to verify that it is configured for your computer.

NOTICE:

To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a

foam pad, that will sufficiently cushion it.

2. Unpack the replacement hard drive, and prepare it for installation.

3. If your replacement hard drive does not have the bracket rails attached, remove the rails from the old drive by